Chapters
0:00 Introduction
0:09 How do I pair it with my Switch?
0:31 How do I connect it to my TV?
1:03 How do I program the mappable buttons?
1:41 How do I reset a programmed button?
1:54 How do I reset all mappable buttons at once?
2:06 How do I use the turbo function?
2:33 How do adjust the vibration strength?
2:58 Does this controller offer motion controls?
3:07 How many game cartridges can it store?
3:15 What is the USB port for?
Step 1
Please enable the Pro Controller Wired Communication setting in the Switch / Switch OLED console itself. You can do this by going to System Settings > Controller and Sensors > Pro Controller Wired Communication. Set the Pro Controller Wired Communication to On.
Step 2
Slide the Switch OLED console into the controller and plug it into the USB-C port at the bottom.
Note (for Switch OLED): The charging port won't line up perfectly due to the OLED's larger size. While sliding in the console, please push/pull the bottom of the console to ensure a proper connection.
Step 3
After you have done so, press the A button on the controller to connect it to the console.
1. After connecting the Switch / Switch OLED console to the gripcon, plug in the original Switch power or a standard Type-C power source. Then, insert your TV's HDMI cable into the HDMI input port at the top of this product. The product will automatically detect the HDMI display device and switch the video output to the TV in about 8 seconds.
2. Press the Video Switch Button on the back of the product to switch between the Switch console and the TV display. Switching from the Switch console to the TV will take about 8 seconds.
3. When using the video output function, you can use the kickstand at the back of the product to place the gripcon and the console on the desktop.
Yes, but ONLY use the original Switch / Switch OLED power adapter to charge the controller.
Yes, it’s equipped with a six-axis gyroscope, allowing it to capture your movements quickly and accurately.
The error rate of this hall effect gripcon is 0.7%.
