NexiGo N940P 2K Autofocus Webcam

Connect the camera to any USB 2.0 or USB 3.0 port. It will take a few seconds for the camera to be recognized after it is connected to the system. To ensure the camera has been installed correctly on a Windows computer; check under Control Panel > System and Security > Device Manager.

To verify the webcam is connected on a Mac computer, click the Apple Menu (in the top left corner of your screen) and then click About this Mac. Click on System Report from the pop-up window that appears. The System Information window for your Mac will appear. Navigate to the USB section and check if the webcam is listed as a connected device (like the photo below):

The NexiGo webcam captures clear images and can record video at 1440p / 30fps or 1080p / 60fps in a well-lit environment. The quality of the signal can be affected by low bandwidth availability or insufficient lighting. This can cause the frame rate to drop to 1440p / 20fps or 1080p / 50fps, or possibly even lower.

Note: This webcam can only record at 60fps when at 1080p resolution.

Step 1. Remove 3M tape backing on the back of the privacy cover.
Step 2. Attach the cover to the webcam lens and press firmly.
Step 3. Open / close the cover as needed.

This webcam is not able to maintain any combination of 2K resolution, 60fps, and /or the built-in zoom function. For 2K resolution the frame rate will be set at 30fps and no built-in zoom functions will be able to be used. 60fps is only possible with 1080p resolution and no built-in zoom. The built-in zoom is only usable at 1080p resolution and 30fps. Alternatively, you can use a program like OBS to create a virtual camera running at 60fps or at 2K resolution, and use the ability to manipulate the image in their program to zoom the image in. For assistance with OBS, please contact the software manufacturer.

Preset Settings:
Step 1. Adjust the camera view to fit your needs. You can zoom in / out using the zoom buttons or pan and tilt the camera using the arrow buttons.
Step 2. Press the Preset button. This will cause the camera to enter Preset Setting Mode, and the camera video playback will darken / become more opaque.
Step 3. Press either the 1 or 2 button to save your preset. lt will be saved to this slot and will override any previously saved preset. This will restore the camera's video playback to its original look.

Remove Preset Settings:
Step 1. Press and hold the Preset button for 2 seconds. This will cause the camera to enter Remove Preset Setting Mode, and the camera video playback will darken / become more opaque.
Step 2. Press either the 1 or 2 button to clear the settings saved in the corresponding button.