Elevate Your 4K Viewing Experience
Tri-Color Laser Engine
Color That Illuminates Reality
Immersive Stereo Sound
Dolby Atmos Soundscape
Dive into immersive Dolby Atmos with four 15W speakers, turning your home theater into an extraordinary cinematic experience
*Tap below to feel the difference.
Please listen with earphones or a dedicated speaker for better distinction.
Conventional Projector
Conventional TV
NexiGo Aurora Lite
*Click to feel the difference.
Please listen with earphones or a dedicated speaker for better distinction.
Seamless Entertainment
Low Latency Gaming
Enable gaming mode for an ultra-low latency of just 8ms, providing stunning clarity for fast-moving objects
Supremely Smooth
Gaming
Stay in sync with the lowest input lag on the market
Intelligent Motion
Compensation
Enjoy smooth, lag-free action with clear visuals
Intelligent Motion Compensation
Enjoy smooth, lag-free action with clear visuals
Large-Scale Visuals at Home
Boasting an impressive 0.233:1 throw ratio and screen sizes ranging from 80” to 150", the Aurora Lite will take your indoor movie night to the next level.
What’s More...
Specifications
Display
Resolution: 3840 x 2160
Refresh Rate: 60Hz
Throw Rate (TR): 0.233:1
Brightness: 1900 Lumens1
Projection Size: Up to 150''2
Lamp Life: 30000 Hours3
Support Format: Dolby Vision, HDR10+, HDR10, HLG
MEMC: Yes
Audio
Speakers: 2 x 15W Woofers, 2 x 15W Tweeters
Dolby Atmos: Yes
DTS HD: Yes
Hardware
RAM: 3GB
ROM: 128GB
Wi-Fi: 802.11ax 2.4G / 5G 2T2R WiFi 6
Bluetooth: 5.2
Keystone Correction: Yes (Support 4 / 8-Point Keystone Correction)
Power
Power Consumption: 300W (Normal)
Input: 100 - 240V - @50 / 60Hz
Standby Power Consumption: ≤0.5W
About
Storage Temperature: -4°F-131°F (-20°C-55°C)
Working Temperature: 32°F-104°F (0°C-40'℃)
operating Humidity: 30%-85%
Interfaces
HDMI: 3 x HDMI 2.1
USB: 3 x USB-A 2.0
Audio Out: 1 x Audio Out
S/PDIF: 1 x S/PDIF
LAN: 1 x LAN
Product Notes:
1. The listed 1900 ANSI Lumens, tested by NexiGo Lab, represent the projector's highest brightness, which may vary due to test conditions and unit variations.
2. For the best viewing experience, we recommend using a projection size of 80-150 inches. Exceeding this range may affect the quality of your projected content. The display quality may vary based on product usage habits and environmental conditions.
3. The light source's theoretical lifespan is 30,000 hours, though actual lifespan may differ based on environmental conditions, usage habits, and the selected mode.
Frequency Asked Questions
Please click here for additional supportWhat's the throw distance for an exceptional viewing experience?
How do I pair the remote with NexiGo Aurora Lite？
Infrared(IR) Pairing：
Point the remote control towards the IR sensor on the back of the projector. The angle of the remote control should not must be within ± 15 degrees of the projector's IR sensor and the distance between the remote control and the sensor(s) should not exceed 26 feet (~ 8 meters).
Bluetooth Pairing (Recommended)：
Enable Bluetooth on your TriVision Ultra by going to Settings > Bluetooth Connection > Bluetooth > On. Please hold the remote within 7.87 inches of the projector. Point it towards the projector and press and hold the Return and Menu buttons simultaneously for at least 10 seconds to put the remote control into pairing mode. lf the pairing is successful, the screen will display the message, "Bluetooth remote control is paired".
Note:
- If the Bluetooth connection is disabled, you will need to re-pair the remote in order to continue using it via Bluetooth.
- Do not place objects in front of the projector's IR sensor. This may prevent the sensor from operating properly.
- The IR sensor on the remote, like all IR sensors, can be interfered with by extremely bright light sources. If the remote is not working properly, make sure that there are no bright lights shining on them.
